|
The
new Ryko BayPay gives your customers the ability to pay
for all self-service, vacuum and vending service on your
site with their credit card.
BayPay
increases customer convenience, wash time and cycle
usage, increasing per bay profit potential.
The
Ryko BayPay feature is available for both Signature
Series rotary and 16 function keypad meter faces.
The components of this system are available for
new equipment installations or as a retrofit kit for
previously installed Signature Series wash systems.
The BayPay system can also be used to pay for
other services on the site including vacuums and vending
machines.
Customers
can keep track of their wash site transactions with the
easy to use receipt printer station.
After completing their wash transactions, a
customer can swipe their credit card in the optional
receipt printer station to receive a printed receipt
giving a detailed list of charges incurred and to close
out all current transactions.
The Ryko BayPay system makes paying for car wash
services more convenient for your customers and more
profitable for you.
Unique
Features of Bay Pay
i
Count
Up” timer operation
i
After
a credit card has been used in a self service wash bay,
the customer can then use the last four digits of their
credit card number plus the “#” key to
activate Ryko Vacuums and Vending Machines that are
equipped with Ryko keypads.
i
Optional
centrally located receipt printer that prints itemized
receipts for each of the customer’s transactions
How
It Works
A customer will swipe their credit card using the
card swipe located on the meter box face
The computer will verify that the credit card is
acceptable to be used
If the number is accepted, the computer will have
the interface pulse the coin output the proper number of
pulses to start the timer
The computer will continue to add pulses to the
coin output as needed until the “Stop” button has
been pressed to stop the charge server time or preset
maximum run time dollar value has been reached.
The beeper will sound as money is added to the
timer to show the customer the total charge amount.
Maximum charge amounts will be set up for the
credit operation. The
site operator will be able to adjust these maximums from
the computer. There
will be separate maximums for each type of device (self
service bay, vacuum, vending machine) on the site
The customer can swipe their credit card at the
receipt printer station to print a detailed receipt of
charges incurred and to close out all current
transactions
Specifications
Required
Components
Ryko
BayPay Card Reader (1 per bay)
Credit
Card Clearing Computer – Ryko BayPay Command Center or
Ryko Code-A-Wash IV IC
RykoNet
2 Network Module
Ryko
Net Network Cable
Electrical
Requirements
BayPay
Card Readers - 24 VAC
Power Supplied from Self Service Pumping Bench
BayPay Receipt
Printer - 120 VAC,
1.5 Amps (max)
BayPay
Command Center - 120
VAC using an uninterrupted power supply
Dimensions
BayPay Receipt
Printer - 7
3/8” Wide
15 3/8” High
7 3/8” Deep
Customer
Requirements
Prior
to installation of Ryko BayPay, the customer must
establish a merchant account with their bank and
complete the required application that will be sent to
the credit card authorization and processing center.
The process to establish a merchant account can
take up to 8 weeks to complete.
Note: The
customer must verify with the bank providing the
merchant account that it uses one of the processing
centers supported by IC Verify.
The Bay Pay option is now available. Please
contact your Ryko Manufacturing Company representative
or distributor for more information regarding the
Signature Series Self Service car wash system or the Bay
Pay option
|
